Television is available via coaxial cable in each residential unit as well as over IP-TV. Televisions that don't have an internal digital tuner that supports Clear QAM will need an external tuner.
How to connect your television
You will need the following:
Cable ready television with a QAM tuner
Manufacturer's instructions for the television
A 3-10 foot coaxial cable
Find the cable television connection in your room. It will be in a white or stainless steel faceplate. There may be old, inactive cable jacks in the room too. Please don't try to use them.
Connect one side of your coaxial cable to the connection on the wall.
Connect the other side of the coaxial cable to the back of your television.
Turn your television on.
Enter the television menu using the Menu button on your remote.
In the settings, set it for "Cable" rather than "antenna" or "terrestrial."
Check to see if there is a setting for Digital vs Analog. If there is, make sure it is set to Digital. (This setting may also be called QAM)
Once this is done, have your TV automatically scan for channels.
NOTE: If you do not know how to accomplish any of these steps, please refer to your Owners Manual. If you do not have one, check the model number of your TV (usually located on a sticker in the back) and you find your appropriate manual.
Online TV Manuals:
IF THESE STEPS DO NOT WORK: You may not have a QAM tuner in your TV. Please call the manufacturer to verify that your TV model does indeed have a QAM tuner and not just an antenna tuner.
IF YOU DO NOT HAVE A QAM TUNER you will need to purchase an external tuner.
Watch Rowan TV on your computer: http://tv.rowan.edu
Available Internet TV Channels:
|The Weather Channel|
|FOX Movie Channel|
|NBC - WCAU|
|ABC - WPVI|
|FOX - WTFX|
|Rowan Events Channel|
|RTN - Rowan Television Network|
Channel Line Ups
SD Lineup Channel
HD Channel Lineup
>> Back to Top